Motor Control Centre VERTICAL's MCC's

In many commercial and industrial applications, quite a few electric motors are required, and it is often desirable to control some or all of the motors from a central location.The apparatus designed for this function is the motor control center (MCC). Motor control centers are simply physical groupings of combination starters in one assembly. A combination starter is a single enclosure containing the motor starter, fuses or circuit breaker, and a device for disconnecting power. Other devices associated with the motor, such as pushbuttons and indicator lights, may also be included.

In our MCC design the physical dimensions of each compartment can be varied in width, height and depth to accommodate the various space requirements for different starter types such as Direct on Line, RDOL/HDOL, Star Delta, Variable Speed Drives, Soft Start, Capacitor.

Application Specification
Type Fixed/Draw out fully componential, dust and vermin proof
Rated Insulation Voltage 690V AC
Rated Operation Volatge 415V AC
Rated Frequency 50Hz
Rated Current (Main Bus) 630 - 2000A
Rated Current (Distribution) 630 - 1250A
Rated Short Circuit 50 KA for 1sec
Rated Peak Current 105 KA
Current upto 2500 Amps
Construction As per IEC Standard normally we offers IP42
Access Single Front (Front) or Double Front ( Front & Rear)
Installation With Space on Front as well as Rear
Cable Entry Bottom or Top
Dimension of Section Width – 600 / 1100 / 2100 mm / Height – 2250 mm / Depth - 450 / 600 / 800mm
Protection IP 5X
Internal Partitioning Form 3-B
Form of Separation As per customer requirement
Ambient temperature 40 degrees Celsius